Now with Mercedes ZGW !!! (see below)
    Product Detail>> Item No.: SE19
Start From: 1

The memory for software and data is implemented as a programmable component into ECUs for a long time now. Ever since these components are erasable even as an assembled part of the ECU more and more vehicle manufacturers chose to provide the possibility to re-load / replace the software and data contents of the respective control unit in addition to the analysis and error detection mechanisms.
    Product Detail>> Item No.: SE18
Start From: 1

Filter the km synchronization command between the cluster and the EZS module . This is the only way for the correction of w221 and w164 new models    Product Detail>> Item No.: SE17
Start From: 1

Filter the km synchronization command between the cluster and the EZS module . This is the only way for the correction of w221 and w164 new models.    Product Detail>> Item No.: SE16
Start From: 1

MOTOROLA Programmer, 9(S)12 Programmer    Product Detail>> Item No.: SE15
Start From: 1

Communication with PC via a serial port
Easy to use Windows 98/ME/XP software
In-circuit/On-board EEPROM programming
High Speed EEPROM Programming
CONFIG Register Programming
    Product Detail>> Item No.: SE14
Start From: 1

Detailed Product Description
The MC68HC908AZ60 programmer supports Motorola MC68HC(9)08AZxx/ASxx, MC68HC05H12 microcontrollers internal EEPROM and FLASH reading, programming. This MCU most used in automotive computers (dashboards, AIRBAG, immobilizers).
    Product Detail>> Item No.: SE13
Start From: 1

The MC68HC705B16 programmer supports programming of Motorola 68HC05Bxx, 68HC05Xxx microcontrollers internal EEPROM - most used programmable device in car radios, automotive computers (dashboards, AIRBAG, immobilizers).
    Product Detail>> Item No.: SE12
Start From: 1

It could identify 17 digit code for all new type of the car which were included E65 chassis, kilometer data at that time and all the info of the car's service. It could issue the service list soon since it has KSD man-hour system & ETK parts software.
    Product Detail>> Item No.: SE11
Start From: 1

The tool for the complete access to all EEpromdaten with VAG-engine control units of type EDC15 and ME7
    Product Detail>> Item No.: SE10
Start From: 1

Support EEPROM programming of TMS374 MCU    Product Detail>> Item No.: SE09
Start From: 1

COM connector and support USB connector as well, Mileage correction reset your the mileage by directly input the
data;
Works on CPUs use NEC board, support userself upgration.
    Product Detail>> Item No.: SE08
Start From: 1

Correct mileage for BMW odometers with M35080 chip. It can support BMW E65 / E38/ E39/ E46, etc.
The newest version for the software is 3.0 now    Product Detail>> Item No.: SE07
Start From: 1

Ovaj uređaj je namenjen za flešovanje računara na automobilima putem OBDII konektora ili direktno spajanjem na ECU automobila.
    Product Detail>> Item No.: SE05
Start From: 1

Mileage correction for BMW CAS / MB EZS / DASHBOARDS / MODULES / with 912 / 9s12 / 9s12x MCU, in circuit programming ( no need removing mcu ), can read / edit / write eeprom of MCU, mileage calculation integrated in soft.
    Product Detail>> Item No.: SE04
Start From: 1

EDC16 ECU Flasher V 3.1.1236
ECU flash reading/writing over diagnostic socket for a wide range of ECU units.
    Product Detail>> Item No.: SE03
Start From: 1

KWP 2000 Plus ECU REMAP Flasher Tuning Tool
USE the KWP2000 PLUS YOU CAN DO:

A. Read and analys your current ECU software;
B.Upgrad the ECU software with a re-mapped file ;
C.Repair ECUs with software problems or corruption    Product Detail>> Item No.: SE02
Start From: 1

EOBD2 FLASHER 1260 is an easy hardware for auto chip tunning.
    Product Detail>> Item No.: SE01
Start From: 1